Chat with us, powered by LiveChat

Superlok Compression Tube Fittings

The patented Superlok i-Fitting is a recent technology that adds benefits and features to the tube fitting’s traditional design. Superlok has incorporated a built-in gap gauge indicator on each of their compression fittings. As a fitting is installed onto tubing, errors are commonly made by over-tightening or under-tightening the compression nut. This is a precise operation and has historically resulted in leaking fittings too often in the field.

With the Superlok design, the tube fitting nut is simply tightened until the built-in gap gauge rings pop away. That moment the rings break away indicates the point of perfect compression. This ingenious design has proven to be a game-changer in the industry by eliminating leaks. As a result, Mako Products backs this technology with a lifetime leak-free warranty.Companies have been able to reduce their exposure to environmental leaks,safety concerns and equipment failure, which is a win-win for everyone.

← Back to All ProductsDownload Spec Sheet Catalog

Available Product Series

SMCI SERIES

Male Connectors

  • 1/16" - 2" (i-Fitting 1/4"-1")
  • 2mm - 38mm
  • 316L Stainless Steel

SFCI SERIES

Female Threaded Connector

  • 1/8" - 1" (i-Fitting 1/4"-1")
  • 3mm - 25mm
  • 316L Stainless Steel

SUI SERIES

Superlok Tube Unions

  • 1/16" - 2" (i-Fitting 1/4"-1")
  • 2mm - 25mm
  • 316L Stainless Steel

SRUI SERIES

Reducing Union

  • 1/16" - 1" (i-Fitting 1/4"-1")
  • 3mm - 25mm
  • 316L Stainless Steel

SAUI SERIES

Male AN/JIC Connectors

  • 1/4"- 1"
  • 6mm - 25mm
  • 316L Stainless Steel

SBHUI SERIES

Compression Bulkhead Connector

  • 1/16" - 1" (i-Fitting 1/4"-1")
  • 3mm - 25mm
  • 316L Stainless Steel

SBHRUI SERIES

Reducing Bulkhead Unions

  • 1/4" - 1/2" (i-Fitting 1/4"-1/2")
  • 3mm - 25mm
  • 316L Stainless Steel

SMCB SERIES

Male NPT Bulkhead Connectors

  • 1/8" - 1"
  • 316L Stainless Steel

SABU SERIES

Male AN/JIC Bulkhead Connectors

  • 1/4" - 3/4"
  • 316L Stainless Steel

SFCB SERIES

Female Threaded Bulkhead Connector

  • 1/8" - 3/4"
  • 6mm - 12mm
  • 316L Stainless Steel

SMEI SERIES

Male Threaded 90° Elbow Connector

  • 1/8" - 2" (i-Fitting 1/4"-1")
  • 3mm - 38mm
  • 316L Stainless Steel

SFEI SERIES

Female Threaded 90° Connector

  • 1/8" - 1" (i-Fitting 1/4"-1")
  • 3mm - 20mm
  • 316L Stainless Steel

SAUEI SERIES

Male AN/JIC 90° Elbow Connectors

  • 1/4"- 1"
  • 316L Stainless Steel

SUEI SERIES

Compression Elbow Connector

  • 1/16" - 2" (i-Fitting 1/4"-1")
  • 2mm - 38mm
  • 316L Stainless Steel

SHMEI SERIES

Male Threaded 45° Elbow Connector

  • 1/4" - 1"
  • 316L Stainless Steel

SHAUEI SERIES

Male AN/JIC 45° Elbow Connectors

  • 1/4"- 1"
  • 316L Stainless Steel

SPMEI SERIES

Male Threaded 90° Positionable Elbow

  • 1/4" - 2" (i-Fitting 1/4"-1")
  • 6MM - 12MM
  • 7/16" - 2-1/2" SAE
  • 1/4" - 1" ISO Parallel
  • 316L Stainless Steel

SPHMEI SERIES

Male Threaded 45° Positionable Elbow

  • 1/4" - 1" (i-Fitting 1/4"-1")
  • 316L Stainless Steel

SSMCI SERIES

Male SAE/MS Connector

  • 1/8" - 1" (i-Fitting 1/4"-1")
  • 316L Stainless Steel

SOSCI SERIES

Male Straight Thread O-ring Connector

  • 1/8" - 1" (i-Fitting 1/4"-1")
  • 316L Stainless Steel

SUTI SERIES

Superlok Tube Union Tees

  • 1/16" - 2" (i-Fitting 1/4"-1")
  • 3mm - 25mm
  • 316L Stainless Steel

SRUTI SERIES

Reducing Tube Tees

  • 1/8" - 1" (i-Fitting 1/4"-1")
  • 3mm - 20mm
  • 316L Stainless Steel

SMBTI SERIES

Male Threaded Branch Tees

  • 1/8" - 1" (i-Fitting 1/4"-1")
  • 3mm - 20mm
  • 316L Stainless Steel

SMRTI SERIES

Male Threaded Run Tee

  • 1/8" - 1" (i-Fitting 1/4"-1")
  • 3mm - 20mm
  • 316L Stainless Steel

SFBTI SERIES

Female Threaded Branch Tee

  • 1/8" - 1" (i-Fitting 1/4"-1")
  • 6mm - 16mm
  • 316L Stainless Steel

SFRTI SERIES

Female Threaded Run Tee

  • 1/8" - 1" (i-Fitting 1/4"-1")
  • 6mm - 16mm
  • 316L Stainless Steel

SUCI SERIES

Union Cross

  • 1/16" - 2" (i-Fitting 1/4"-1")
  • 3mm - 25mm
  • 316L Stainless Steel

SRI SERIES

Superlok Tube Stub Reducer

  • 1/16" - 1" (i-Fitting 1/4"-1")
  • 3mm - 25mm
  • 316L Stainless Steel

SRB SERIES

Superlok Tube Stub Reducer Bulkhead

  • 1/8" - 1" (i-Fitting 1/4"-1")
  • 316L Stainless Steel

SP SERIES

Compression Plug

  • 1/16" - 2" (i-Fitting 1/4"-1")
  • 2mm - 38mm
  • 316L Stainless Steel

SCI SERIES

Compression Tubing Cap

  • 1/16" - 2" (i-Fitting 1/4"-1")
  • 2mm - 38mm
  • 316L Stainless Steel

SNI SERIES

Compression Nut

  • 1/16" - 2" (i-Fitting 1/4"-1")
  • 2mm - 38mm
  • 316L Stainless Steel

SFS SERIES

Compression Double Ferrule Set

  • 1/16" - 2" (i-Fitting 1/4"-1")
  • 2mm - 38mm
  • 316L Stainless Steel

Series Information

PERFECT TUBE FITTING CONNECTION EVERY TIME!


If you’ve never used Superlok fittings, then you’ve probably also had some poorly gapped and leaky tube fitting connections, and you’re not alone. In the past, it’s been nearly impossible to tell (without the aid of special tools) if you’ve tightened your tube fittings enough or if you have them in too tight. The result in either case is leaks, potential blowouts due to a poor seal, or excessive strain on your tubing. All these small things can add up to real problems. Choosing the right stainless steel compression fittings can make a massive difference in safety and cost for your operations.

Mako Products is your go-to USA source for Superlok fittings and valves. Using patented technology, Superlok tube fittings and valves create a perfect seal every time, so there are no leaks — saving you time, money, and making working environments safer. There’s also no over-tightening during installation, meaning no added stress on your tubes. The built-in gap gauge on every fitting lets you know you’re doing it right. There’s no safer fitting on the market! We guarantee a safe and secure connection with a lifetime guarantee.

Our Superlok compression fittings are interchangeable with all major brands of fittings, like DK-Lok, Parker, Swagelok, and more. You’ll have no trouble introducing them into your system.

HOW OUR SUPERLOK COMPRESSION TUBE FITTINGS WORK


It’s all about the magic of our Superlok i-Fitting with the self-measuring gap gauge already installed on your fitting or compression end valve. We understand that the leading cause of connection failures is an improperly tightened fitting. Improperly tightened fittings can result in leaks or excess system strain, which can lead to increased replacement costs and even threats to your workers’ safety.

Using Mako Products’ Superlok tube fittings, with proprietary i-Fitting technology, means you don’t have to worry because we take the human element out of the equation. Your workers won’t have to use their “gut” to figure out if the fitting is tightened enough or too tight. All they have to do is tighten until the Superlok i-Fitting red ring pops off. You’ll know you’re at the correct compression every time!

Our i-Fitting technology has revolutionized the industry and is part of all of our ss compression tube fittings and tube end valves. Improve the efficiency of your entire tubing system with any of our Superlok products.

FOR MORE INFORMATION ON SUPERLOK COMPRESSION TUBE FITTINGS, CONTACT MAKO PRODUCTS

You’ll be amazed by the power and efficiency of this new technology. No more guesswork — with our patented Superlok i-Fittings, you can see, hear and feel the connection every time, making this the safest fitting anywhere on the market. We have single ferrule and double ferrule fittings and valves, so you can find the parts you need.

Why not save time and money with Superlok compression tube fittings today? As your go-to source in North America for these products, we offer a lifetime guarantee, so you have nothing to lose but the headaches of dealing with improper fittings. Contact us at Mako Products for safe and secure connections on all your stainless tubing today!

MAKO PRODUCTS

Connect with Our Team

Our team is eager to help answer any questions you may have. Reach out by providing your information below and we'll gladly connect.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Contact Info

Location

13823 Santa Fe Crossings Dr Edmond, OK 73013

Find Us
E-mail Address

sales@mako-products.net

E-mail Us
Phone

Local: 405-509-2665
Toll Free: 1-844-200-MAKO (6256)

844-200-6256

Our Blog

Check out our blog for the latest updates and how-to's from Mako Products!

View All